News & Media
Triton Prestige PR-227 Trailer ReviewOctober 10th, 2016
This article originally appeared in SnowGoer magazine and can be found here.
Good things come to those who wait, they say. And Snow Goer magazine staffers patiently waited a long time before taking delivery of a Triton Prestige snowmobile trailer last year.
“Sorry, guys – but we had to sell it,” said Triton Sales Director Jeff Goodwin on more than one occasion when we inquired about our forthcoming enclosed trailer. “We can’t build them fast enough.” Our own data indicates the same trend.
Results of the 2008 and 2016 Snow Goer magazine reader surveys show that enclosed trailer use increased by 10 percent over that eight-year span, and one subset of the enclosed category is inline trailers like the PR-227 we tested last winter. Their narrow profile offers better rearward visibility than full-width trailers because the driver’s view isn’t blocked by the front of the trailer, and there’s less drag thanks to the fact the truck punches a hole that spans the entire width of the trailer’s front wall.
Triton offers 83 accessories, according to the company’s website, for its flagship line of Prestige trailers. We ordered our 22-foot demo with aluminum wheels, roof vents, side door with window, fuel doors, 32-inch cabinet, multi-color exterior and 24-inch diamond plate along the bottom of the interior, among other accessories.
The company classifies the PR-227 as a 22-foot trailer because the box portion is 22 feet long, but the ‘V’ is 5 feet long and the tongue is 3 feet – bringing the total length to 30 feet. Interior dimensions are 6 feet, 8-3/4 inches wide by 26 feet, 8 inches long from the tail to the nose, which was enough space to accommodate any combination of four machines we wanted to haul, including a trip when we transported one machine with a 129-inch track, two 137s and one with a 144-inch track. The narrow chassis of inline trailers means snowmobiles must be staggered inside – they won’t fit side-by side like in a conventional trailer. But even though there were four big sleds inside, there was enough room to allow an air gap around all machines so they didn’t rub on each other or the trailer’s walls.
To prevent the snowmobiles from shuffling during transport, we put a tie-down bar across each machine’s skis and ran a strap through the rear bumper and hooked it to the accessory Quickslide adjustable tie-down hooks in the floor. The accessory, wall-mounted coat rack was a convenient place to hang the tie-down straps when they weren’t in use.
The trailer fetched many compliments from riding companions and complete strangers at gas stations and lots at trailheads. People not only admired its appearance and tidy fit-and-finish, but also its practical and well-made accessories, quality construction and superb components like the watertight door seals and rigid tie-down tracks in the floor. Exterior lights made loading easier, and the interior LEDs let us work inside – installing tie-down bars, moving and tightening in-floor hooks and connecting tie-down straps – without any trouble after sunset. Huge, labeled light switches inside the front and rear doors were easy to operate with a gloved hand.
To experiment with weight dispersion, on some occasions we loaded four snowmobiles by driving each of them in through the rear door, which put more weight on the tongue, and other times we drove them through the front door to put more weight on the tail. Both arrangements worked equally well as the three different half-ton pickups that towed the trailer last winter managed the load without sway or excessive sag, though one truck was equipped with air helper springs to limit sag caused by the extra weight. Fuel mileage for two Ford F-150s and a Ram 1500 pulling four sleds was consistently 8.5 to 9.2 mpg with variables like speed, driver, traffic, air temperature, terrain and total distance affecting the figure.
Our only trouble with the trailer came from the man-door latch that would disengage and allow the door to open while rolling down the freeway. We made a simple adjustment to the latch plate after the first time this happened so the latch would hold more securely, but the door again opened by itself the next time we pulled the trailer.
We re-adjusted the plate’s position and threw a shoulder into the door to test it before hitting the road and all seemed well, but the latch disengaged and the door opened by itself yet again. After a third adjustment didn’t work, we set the deadbolt and that kept it closed. The problem likely stems from the fact that, like any road-bound vehicle, camper or trailer, our Triton twisted and flexed while it rolled down the road, and that allowed the latch to unhook from the plate.
More than a year passed between placing the order and taking delivery of our Triton Prestige trailer, but it was worth the wait. Its features and the company’s attention to detail translated to an overall premium trailer that looked great, and was fun and easy to use. That explains why demand is so high.
Prestige PR-227 Trailer – $16,999
2,425: The empty trailer’s weight, in pounds, according to a set of Intercomp wireless scales.
Quality: All components of the trailer showed excellent attention to detail.
6.0: A low roofline tows easier, but Triton reps say resale is better with a 6.5-foot ceiling like our trailer had.
Editor’s Note: In each issue of Snow Goer magazine, our team of experienced product testers reviews various aftermarket products in the Cold Tested department. This review was printed in the November 2016 issue of Snow Goer. Subscribe to Snow Goer to receive such reviews, 7 times per year delivered to your home.
- Neosho Cup
- CBS Story on FXR Mobile Medical Unit
- 2016 United States Dealer of the Year
- Brewer Game
- New ATV90
CBS Story on FXR Mobile Medical Unit
2016 United States Dealer of the Year
Triton Trailers The King of Tow
New Tilt Models
In the Spirit
New Snocross Mobile Medical Team
Triton LowRider Hybrid TC Trailer
How Triton is Helping Rural Ecuador
Triton Prestige PR-227 Trailer Review
Snowmobile Trailer Selection
Versatile New Kayak Trailer Design